Oil Filter is an essential component of your car’s engine. Most people ignore its maintenance and think that looking after your car is only washing it regularly and changing engine oil. Well, this prolonged ignorance often leads to facing a situation where they have to deal with a stuck oil filter or worse remove a broken oil filter.
If you remove the oil filter on a regular basis and change the oil, then this process will be a breeze for you and only a matter of a few minutes for a DIY. But, since you are in a situation where your oil filter is stuck or you have to remove a broken oil filter, it might take more patience and some broken oil filter removal tools.
Inspecting your Oil Filter:
Maybe the situation is not as bad as you are imagining it to be. So, the first thing you must do is grab hold of a rag and simply clean the area around the oil filter. Check whether it is just stuck, broken, or completely destroyed. This examination will give you an idea about the clearance area and if it is possible to get a grip on the oil filter by using certain tools.
You can also decide which tool to buy from the auto parts store to remove your broken oil filter once you know whether it will work or not.
Is your Oil Filter Stuck?
If this is the case then you are in luck. An oil filter is stuck mostly due to tightening the oil filter during the previous replacement. Other reasons can be not lubricating the mounting surface or the rubber seal on the new filter with some part of the oil, forcing the oil filter in a hurry and not following the treads
But, this is a better situation than having to remove a broken oil filter because you can simply use an oil filter wrench like one from the Klickwrench online store which is sturdy and will get the stuck filter removed effortlessly. Also, it has a built-in torque limit mechanism that will assist you when you replace the oil filter with a new one.
Let’s Remove the Broken Oil Filter:
A lot of people deal with broken oil filters because they try to use a hammer, a screwdriver, or even drill to loosen it. So, here is a step by step guide to how it would be the safest to remove the de-shaped and totally broken oil filter from your car.
The smartest thing to do first would be to get rid of the oil that is already circulating in your car’s engine. For this, get your engine running for a minute or so. This will heat the oil and as predictable, hot oil will flow easily making it convenient to be drained completely.
Next, you can place a jack stand to provide some inclination to your car. Now use a socket wrench to remove the drain plug and drain all the oil. Use a drain pan to collect the old gunky oil. Don’t forget to dispose of it properly and responsibly. Don’t just throw it with the regular garbage as it is highly flammable.
In this step, you must try to remove the oil filter cap with the help of some standard broken oil filter removal tools.
- A suitable oil filter wrench cup. Check out the Oil Filter wrench cup from Klickwrench. The best part of their oil filter wrench cup is that the single-cup is suitable for different sizes of filters. Thus, even if your oil filter is a little de-shaped, it might give you a good grip.
- If the state is really worse, you can try using a strap wrench that is not limited to any particular size or vehicle type. You might need to apply much additional force. But, it can loosen the mounted filter.
- You can try using a wrench cup in combination with a chain wrench to fasten a better grip around the filter cap and try loosening the broken filter.
- Alternatively, try using sharp oil filter wrenches with 2-3 jaws and can fit at the points where there is still a possibility to get a grip. Use channel locks to get help for grip on the filter body.
- Another valid option is using filter pliers.
One of these many tools will definitely work for you and help you remove the broken oil filter. But, even if this does not work, there is no need to panic there is one last resort you can take before declaring it to be a doomed situation or one where you need professional help to solve it.
The only way now to remove the broken oil filter is by taking the parts of the oil filter one by one apart. By any means, the cap has to be removed, i.e. use every tool you can lay your hands on. You have to rip the threaded part and reach for the center with screws. Next, grab a screwdriver and unscrew the bolts. Once all the screws are loose enough, carefully remove it with your hands.
Tips for Further Car Maintenance:
Always try to keep a check on the engine light and keep a record of the number of miles you run after your last oil filter change. Always apply some clean engine oil on the rubber gasket before you install the new one and remember that the filter needs only a quarter turn to fit after it is mounted. The best way is to avoid all the stress and buy an oil filter wrench cup which has an in-built torque limiting mechanism. Avoid changing the parts immediately after you have been driving the car. It can end up causing you burns in the hand or other accidents. Use good quality of new engine oil and oil filter for replacement. It will take you a long way in the upkeep of your car.